Made from rubbish & signage waste
The future of sustainable
building materials
hoarding. plasterboard. ceiling tiles
Transform your space with Gboard
sustainable building
solutions
G-Board is proof that truly sustainable building products need not compromise on the performance of single-use alternatives
Our boards represent a genuinely circular building solution that is manufactured from 100% post consumer packaging & signage waste while also being fully recyclable at end-of-life.
Gboard offers the chance to do right by the planet while retaining the capabilities of traditional building products. EPD available for hoarding panel, plasterboard & ceiling tiles.
Discover
Gboard is a premium engineered composite panel crafted entirely from 100% recycled materials saving
tonnes off rubbish
from landfill.
Gboard uses similar manufacturing methods to conventional composite boards only it is made entirely from recycled materials. Its core is composed of packaging and signage waste which is heated and compressed to produce a high performance panel with moisture resistant exterior.
Gboard is fully recyclable! At the end of its life, old panels are seamlessly transformed into new panels, guaranteeing they never reach landfill.
This process supports a circular economy by diverting waste from landfill and upholding a zero-waste philosophy. This innovative product offers an eco-friendly alternative to traditional building materials, combining sustainability with durability.
Proudly manufactured in Australia and New Zealand, Gboard embodies our commitment to creating products that are both high-performing and environmentally responsible.
Waste diverted from landfill
* Carbon = when comparing Gboard to treated plywood
Building Products
hoarding
ceiling tiles
DESCRIPTION
-
Engineered composite board for interior ceiling applications.
-
Noise attenuation - STC Rating of 30dBA at 10mm thickness board only.
-
Good mould resistance
-
Water repellent
-
ZERO Water, Glues, Chemicals added. VOC's and Formaldehydes are < 1% of the Green Building Standard (0.004mg/m2/hr)
-
Declare label: Our products have been determined to meet the requirements for all applicable Imperatives of the Living Building Challenge.
-
Environmental Product Declaration (EPD) for our Ceiling tiles has been completed
APPLICATION
-
Commercial ceiling tiles
-
Material Group 3 fire rating.
-
Any penetrations requires cutting with mechanical tools (skill saw, drills)
-
STC Rating of 30dBA at 10mm thickness ceiling tile only
THICKNESS
10mm
DIMENSIONS
595mm x 1195mm
plasterboard
-
Curved walls and bends down to 150mm radius - requires Kerf cutting of the back face.
-
Material Group 3 fire rating.
-
STC Rating of 30dBA at 10mm thickness board only
DESCRIPTION
-
Engineered composite board for interior applications.
-
Impact resistant
-
Screw anything direct to the surface, no need to find studs.
-
Superior wind & seismic bracing
-
High thermal performance
-
Noise attenuation with high STC rating - 30dBA at 10mm thickness board only
-
Good mould resistance
-
Water repellent, but not a replacement for bathroom plasterboard.
-
ZERO Water, Glues, Chemicals added. VOC's and Formaldehydes are < 1% of the Green Building Standard (0.004mg/m2/hr)
-
Declare label: Our products have been determined to meet the requirements for all applicable Imperatives of the Living Building Challenge.
-
Environmental Product Declaration (EPD) for our Paperfaced internal lining has been completed
APPLICATION
-
Interior Walls & Ceilings (plasterboard alternative with tapered edges)
-
Paintable surface with recycled paper facing
-
Direct substitution; use the same screws, fixing spacing, tapes and adhesives for installation.
-
Suitable for high impact areas as an alternative to plywood.
-
Requires cutting with mechanical tools (skill saw, drills).
-
THICKNESS
-
10mm - either square or tapered edge
-
12mm - either square or tapered edge
Click, zoom & rotate to see in 3D
hoarding & ceiling tile colours
Signage
Take your signage circular with Gboard
Australia, now your signage waste
doesn't need to end up in landfill
Visionary Green is Australia's first comprehensive recycling program designed to combat printed self-adhesive vinyl waste.
Visionary Green-approved PVC-free materials can be collected at end-of-life and upcycled into Gboard, ensuring this signage waste never goes to landfill. Gboard is a rigid composite building material made from post-consumer plastic waste, fibre waste and signage waste. Gboard is a low-carbon alternative to plywood with multiple uses in the signage, retail display, exhibition and building industries. Gboard is the only timber alternative made entirely from waste and which at end-of-life can be recycled infinitely.
Zero waste signage. Zero landfill.
